Products › KNX plugin
KNX plugin
Control KNX lighting, blinds and scenes straight from Q-SYS over KNXnet/IP – no extra gateway plugin needed
Coming soon. This plugin is not available yet.
KNX in your Q-SYS design – coming soon
MLST KNX talks KNX directly over KNXnet/IP. Connect to a KNX IP interface or router, type in the group addresses, and control lighting, blinds and screens from the design, a UCI or control pins. Levels set from wall switches or other systems come back into Q-SYS, so the UCI always shows what is really happening.
Features
- Groups with a value group address (DPT 5, 0–100 % or 0–255), an optional status address that is read back and an optional on/off address (DPT 1)
- Fader, + / – and on/off per group, plus preset buttons (for example 100, 75, 50, 25 and 0 %). The button that matches the current level lights up – also when the level is changed from the KNX side
- Linked groups: one group can follow another
- Scenarios that set many groups at once, recalled from the UCI, a pin or a weekly schedule (time and weekdays)
- Tunneling to a KNX IP interface/router, or routing (multicast 224.0.23.12)
- Bus monitor and test telegrams (send and read) for commissioning
- Pins for UCIs and scripts: levels, on/off, buttons, scenarios and connection status
Licensing
Licensed per Q-SYS Core, like all MLST plugins. Full function in Emulate, and a free demo at release.
Sign up for the newsletter at the bottom of the page to hear when it is released.
Independently developed by MLST. This product is not affiliated with or endorsed by Q-SYS or the KNX Association. Trademarks are used solely to describe compatibility.
Compatibility and requirements
- Q-SYS Designer: Q-SYS Designer 10.x
- KNX connection: KNXnet/IP tunneling to a KNX IP interface or router (UDP 3671), or routing (multicast 224.0.23.12)
- Data types: DPT 1 (on/off) and DPT 5 (0–100 % or 0–255)
- License: Per Q-SYS Core (MLST license). Full function in Emulate